(APPLICATION):
1. Process material: FM-PE, PE.
Suitable for copper conductor skin-Foam-Skin chemical/physical foaming three layer co-extruded insulation precision extrusion;
PLC + professional data software, IPC+ operation storage display, process parameters, adjustment and monitoring Of production status.
2. This production line is composed of the Nitrogen injection machine for foaming, the precise triple layer crosshead, and on-line testing device for capacitance and eccentricity.
It is for making CAT7 and CAT8 cable, coaxial cable, and railway signal communication cable, CATV, Data cable, RG, JIS, DVI, HDMI etc.
Product data:
Diameter over sheathing:
Process material: PVC, XLPE
Process solution: Single layer; Double layer
(Equipment features):
1. Max. Foaming degree: 75 %( PE data cable foaming degree can not exceed 50%; PE mini coaxial cable can not exceed 60%).
2. Testing online device: Insulated out diameter, capacitance testing, concentricity testing and ZUNBACH control & monitor system
3. The optimization design, of model large lenth diameter ratio of screw, with good foam, plastic completely etc.,
4. Extrusion products concentricity diameter tolerance of 95%, +/-0.008, capacitance +/-0.5; Temperature +/-1 degree.
(OPtional):
1. Cross-head of Domestic or Switzerland, To achieve inner and outer precision co-extrusion, Equipped with discharge valve.
2. Precision outer diameter, Eccentricity tester, Static capacity tester feedback device
WHY DO WE TRUST YOUR COMPANY?
We are the leading manufacturer of any kinds of complete wire and cable extrusion line in China since 1999,Our machine has exported to over 53 different countries,like Germany,Poland,Italy,Russia,etc...
HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2.Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1 hour by car from Shenzhen airport to our factory.
1. Process material: FM-PE, PE.
Suitable for copper conductor skin-Foam-Skin chemical/physical foaming three layer co-extruded insulation precision extrusion;
PLC + professional data software, IPC+ operation storage display, process parameters, adjustment and monitoring Of production status.
2. This production line is composed of the Nitrogen injection machine for foaming, the precise triple layer crosshead, and on-line testing device for capacitance and eccentricity.
It is for making CAT7 and CAT8 cable, coaxial cable, and railway signal communication cable, CATV, Data cable, RG, JIS, DVI, HDMI etc.
Product data:
Diameter over sheathing:
Process material: PVC, XLPE
Process solution: Single layer; Double layer
MODEL | GT-PF45+30 | GT-PF65+35 | GT-PF90+40 |
Pay off | Motorized pay off | Motorized pay off | Motorized pay off |
Pay off bobbin | PN300-500 | PN400-630 | PN500-630 |
Screw diameter | 45+30(sub-extruder) | 65+35( sub-extruder ) | 90+40( sub-extruder ) |
Screw L: D | 36:01:00 | 36:01:00 | 36:01:00 |
Capacity (kg/hr) | 25 | 80 | 170 |
Main motor | 15 HP | 30 HP | 50HP |
Wire diameter | Φ0.8-2.5 | Φ3.5-6.0 | Φ8.0-15.0 |
Temp control | 8zone | 10 zone | 12zone |
Cooling device | U type single layer(18m) | U type single layer(30m) | U type single layer(40m) |
Pulling power | 3HP | 5HP | 10HP |
Accumulator | horizontal | horizontal | horizontal |
Length of accumulating | 200m | 200m | 200m |
Running speed | MAX300 | MAX300 | MAX300 |
Taking up type | Double bobbin | Double bobbin | Double bobbin |
Taking up bobbin | PN400-500 | PN500-800 | PN630-1000 |
(Equipment features):
1. Max. Foaming degree: 75 %( PE data cable foaming degree can not exceed 50%; PE mini coaxial cable can not exceed 60%).
2. Testing online device: Insulated out diameter, capacitance testing, concentricity testing and ZUNBACH control & monitor system
3. The optimization design, of model large lenth diameter ratio of screw, with good foam, plastic completely etc.,
4. Extrusion products concentricity diameter tolerance of 95%, +/-0.008, capacitance +/-0.5; Temperature +/-1 degree.
(OPtional):
1. Cross-head of Domestic or Switzerland, To achieve inner and outer precision co-extrusion, Equipped with discharge valve.
2. Precision outer diameter, Eccentricity tester, Static capacity tester feedback device
WHY DO WE TRUST YOUR COMPANY?
We are the leading manufacturer of any kinds of complete wire and cable extrusion line in China since 1999,Our machine has exported to over 53 different countries,like Germany,Poland,Italy,Russia,etc...
HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2.Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1 hour by car from Shenzhen airport to our factory.